D.T.S. JACK User Manual download pdf (Page 24)

18- OPENING THE PROJECTOR HOUSING

It is possible to inspect the inside of the projector by removing the cover as indicated

below.

ATTENTION

REMOVE MAINS POWER PRIOR TO ACCESSING THE

PROJECTOR‟S INTERNAL COMPONENTS.

1) Loosen the 2 screws which fix the head covers (photo 1) .

2) Once unscrewed, simply lift the covers to access the internal components (photo 2

and 3).

Photo 1 Photo 2 Photo 3

19- REPLACING GOBOS

JACK uses a mechanical system which allows the fixture's gobos to be removed

without the use of special tools.

Replacement gobos should be made of either heat resistant glass or metal.

An ever-increasing range of gobos is available from your D.T.S. sales network.

Gobo dimensions are as follows:

Rotating gobo wheel

ø external (ED) = 14.0 mm + 0 / - 0,1 mm

ø of image with defined edge (ID) = 6.0 mm

thickness = from 0.2 to 3 mm (see catalogue)

Max thickness 3 mm

Fixed gobo wheel

ø external (ED) = 14.0 mm + 0 / - 0,1 mm

ø of image with defined edge (ID) = 6.5 mm

thickness = from 0.2 to 1.2 mm (see catalogue)

Max thickness 1.2 mm

1/4 TURN

COUNTER

CLOCKWISE

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

No comments

D.T.S. JACK User Manual Page 24